This is an old revision of the document!

Inverting Operational Amplifier

Gain of Op-Amp

Build the following circuit in figure 1 with the power supply and a multimeter.

Fig. 1: Inverting Op-Amp

$U_{\rm DD}{\rm~=10~V},~U_{\rm SS}{\rm~=-10~V},~R_{\rm 1}{\rm~=10~k\Omega}$

Calculate the necessary value for $R_{\rm 2}$, so that the Output $U_{\rm OUT}$ is +5 V. Use the supply voltage of the operational amplifier for $U_{\rm IN}$.


$U_{\rm IN}{\rm~=}$



















$R_{\rm 2}{\rm~=}$

Investigation of inverting input

Fig. 2: Inverting Op-Amp: Investigate inverting input

$U_{\rm DD}{\rm~=10~V},~U_{\rm SS}{\rm~=-10~V},~R_{\rm 1}{\rm~=10~k\Omega}$

For $U_{\rm IN},~U_{\rm OUT},~R_{\rm 2}$ use the values from figure 1.


Complete the arrows in the scematic of the circuit.
Determine the the currents $I_{\rm 1}$ and $I_{\rm 2}$ indirectly through a voltage measurement. Calculate the sum of the currents at node ${\rm N_12}$.







































$I_{\rm 1}{\rm~=}$


$I_{\rm 2}{\rm~=}$


$I_{\rm \Sigma N12}{\rm~=}$

- Virt masse messen
- r2 kurzschluss