Differences

This shows you the differences between two versions of the page.

--- electrical_engineering_and_electronics_2:start [2025/10/26 22:45] – mexleadmin
+++ electrical_engineering_and_electronics_2:start [2026/03/05 02:07] (current) – mexleadmin
@@ Line 1: / Line 1: @@
-  - Switching operations in direct current networks (approx. 3 blocks)
+===== Block plan =====
-    - Charging/discharging an RC element
-    -  Switching coils
-    - Magnetically coupled coils
-  - Alternating current networks (approx. 5 blocks)
-    - Representation of sinusoidal quantities
-    - Example: RC element
-    - Capacitor with alternating voltage
-    - Coil with alternating voltage
-    - Complex calculation of networks with R, L, C (“recipe” for procedure)
-    - Graphical solution of networks with R, L, C (RC element, RL element)
-    - Power (effective value, power factor, active/apparent/reactive power, loss factor, loss angle)
-    - Components R, L, C with alternating current
-    - Reactive power compensation
-    - Oscillating circuits
-  - Semiconductor components (approx. 4 blocks)
-    - Fundamentals (conductors, semiconductors, insulators, doping, band model, intrinsic conductivity)
-    - Diodes (real characteristic curve, operating point, equivalent circuit)
-    - Zener diode
-    - LED
-    - Protective circuit with diodes
-    - Rectifier circuits (single-phase rectifier, center tap circuit, bridge rectifier, smoothing capacitor)
-    - Bipolar transistor (structure, designations, characteristic curve, characteristic values)
-    - Transistor as a switch (circuit, switching times and behavior)
-    - MOSFET (structure, comparison with bipolar transistor)
-    - Optional: Transistor as an amplifier
+<callout>
+[[introduction_in_eee1|Introduction in Electrical Engineering 2]]
+</callout>
+<WRAP group >
+<WRAP column half>
+<callout>
+**Chapter 1 — Switching operations in DC networks**
+  * [[block01|Block 01 — Charging/discharging an RC element]]
+</callout>
-Old lecture notes:
+<callout>
+**Chapter 2 — AC Networks**
+(approx. 5 blocks, based on previous lectures on [[electrical_engineering_1:introduction_in_alternating_current_technology|Intro to AC]] and [[electrical_engineering_1:circuits_under_different_frequencies|AC circuits]])
+  * [[block02|Block 02 — Sinusoidal quantities and L, C in AC]]
+  * [[block03|Block 03 — Complex calculation]]
+  * [[block04|Block 04 — Complex Power]]
+  * [[block05|Block 05 — R, L, C with alternating current]]
+  * [[block06|Block 06 — Oscillating circuits]]
+</callout>
+</WRAP>
+<WRAP column half>
+<callout>
-\\ Electrics
+**Chapter 3 — Semiconductor Components**
-\\ [[electrical_engineering_and_electronics_1:the_electrostatic_field|1 The electrostatic Field]]
+(approx. 4 blocks, based on previous lectures on [[circuit_design:2_diodes|Diodes]] and [[circuit_design:2_transistors|Transistors]] )
-\\ [[electrical_engineering_and_electronics_1:the_stationary_electric_flow|2 The stationary electric Flow]]
+  * [[block07|Block 07 — Semiconductor Fundamentals and Diodes]]
-\\
+  * [[block08|Block 08 — Application of Diodes]]
-\\ Magnetics
+  * [[block09|Block 09 — Transitors]]
-\\ [[electrical_engineering_and_electronics_1:the_magnetostatic_field|3 The magnetostatic Field]]
+  * [[block10|Block 10 — Application of Transistors]]
-\\ [[electrical_engineering_and_electronics_1:the_time-dependent_magnetic_field|4 time-dept. magnetic Field]]
+</callout>
-\\ [[electrical_engineering_and_electronics_1:magnetic_circuits|5 Magnetic Circuits]]
-\\ Electromagnetic Applic.
+<callout>
-\\ [[Inductances in Circuits          |6 Inductances in Circuits]]
+**Chapter 4 — Switching operations in DC networks**
-\\ [[polyphase_networks               |7 Polyphase Networks]]
+  * [[block11|Block 11 — Switching coils]]
-\\ [[transformer                      |8 The Transformer]]
+  * [[block12|Block 12 — Magnetically coupled coils]]
+</callout>
-\\ \\
+</WRAP></WRAP>
-[[old exams]]
-\\ \\ \\ \\ \\ \\ \\ \\ \\ \\