Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

Beide Seiten der vorigen Revision Vorhergehende Überarbeitung
Nächste Überarbeitung		 Vorhergehende Überarbeitung
electrical_engineering_and_electronics_1:block14 [2025/11/02 19:09] – mexleadminelectrical_engineering_and_electronics_1:block14 [2025/11/02 21:32] (aktuell) – [Conceptual overview] mexleadmin
Zeile 5: Zeile 5:
 After this 90-minute block, you can After this 90-minute block, you can
   * explain what a **steady (stationary) conduction field** is and relate it to the electrostatic field (cause/effect view: $\vec{E}$ vs. $\vec{D}$; conduction uses $\vec{E}$ and material $\sigma$).    * explain what a **steady (stationary) conduction field** is and relate it to the electrostatic field (cause/effect view: $\vec{E}$ vs. $\vec{D}$; conduction uses $\vec{E}$ and material $\sigma$). 
-  * use the **current-density law** $\vec{j}=\sigma\,\vec{E}$ and the **current flux** $I=\iint_A \vec{j}\cdot{\rm d}\vec{A}$ with correct surface orientation.  +  * calculate **conductance** $G$ and **resistance** $R$ for key geometries (parallel plates , coaxial conductor). 
-  * derive and calculate **conductance** $G$ and **resistance** $R$ for key geometries (parallel plates , coaxial conductor). +
 </callout> </callout>
  
Zeile 19: Zeile 18:
  
 ===== 90-minute plan ===== ===== 90-minute plan =====
-  - Warm-up (x min):  +  - Warm-up (10 min): 
-    - ....  +    - Quick recap of Block 11 field pictures (parallel plates, coax) → link to resistance by replacing $\varepsilon$ with $\sigma$. 
-  - Core concepts & derivations (x min): +    - Mini check: which vector integrates over length/area? ($\vec{E}$ along paths, $\vec{J}$ across areas) 
-    - ... +  - Core concepts (20 min): 
-  - Practice (x min): ... +    - Definitions: steady conduction, $\vec{j}=\sigma\vec{E}$, current $I$. 
-  - Wrap-up (x min): Summary box; common pitfalls checklist.+    - From **potential drop** to **Ohm’s law** in fields. 
 +  - Guided derivations (25 min): 
 +    - Parallel-plate bar 
 +    - Coaxial conductor 
 +  - Practice (30 min): 
 +    - Short exercises: compute $R$ for a busbar, and for a coax segment; compare materials (copper vs. aluminum). 
 +    - “What-if” variations: halve $l$, double $A$, change $\sigma$; predict $R$ qualitatively before computing. 
 +  - Wrap-up (5 min): 
 +    - Summary box (key formulas, units); **Common pitfalls** checklist and Q&A.
  
 ===== Conceptual overview ===== ===== Conceptual overview =====
 <callout icon="fa fa-lightbulb-o" color="blue"> <callout icon="fa fa-lightbulb-o" color="blue">
-  - ...+  - **Analogy:** Replace *displacement flow* in dielectrics ($\vec{D}=\varepsilon\vec{E}$, charge storage) by **flow density** in conductors ($\vec{J}=\sigma\vec{E}$, charge transport). \\ Driving cause is still the electric field $\vec{E}$; the material parameter changes from $\varepsilon$ to $\sigma=\dfrac{1}{\rho}$. 
 +  - **Global relations:** Voltage is a line integral $U=\int \vec{E}\cdot{\rm d}\vec{s}$; current is a flux integral $I=\iint_A \vec{J}\cdot{\rm d}\vec{A}$. \\ Their ratio defines $G=\dfrac{I}{U}$ and $R=\dfrac{U}{I}$ for a given geometry and material. 
 +  - **Geometry matters:** Uniform fields (parallel plates) give $E=\text{const}$ and simple $G=\dfrac{\sigma A}{l}$. \\ Curved fields (coax) spread with radius → logarithmic dependence. 
 +  - **Checks:** Units ($\sigma$ in $\rm S/m$, $G$ in $\rm S$, $R$ in $\Omega$). Limits: \\ $A\!\to\!\infty \Rightarrow R\!\to\!0$ \\ $l\!\to\!0 \Rightarrow R\!\to\!0$ \\ $r_a\!\downarrow r_i \Rightarrow R\!\to\!0$.
 </callout> </callout>
  
Zeile 70: Zeile 80:
   &= {{ \rlap{\Large \rlap{\int_A} \int} \, \LARGE \circ} \;\; \vec{J} \, {\rm d} \vec{A}\over{\int \vec{E} \,{\rm d} \vec{s} }}    &= {{ \rlap{\Large \rlap{\int_A} \int} \, \LARGE \circ} \;\; \vec{J} \, {\rm d} \vec{A}\over{\int \vec{E} \,{\rm d} \vec{s} }} 
 \end{align*} \end{align*}
- 
- 
  
 Given the results from [[https://wiki.mexle.org/electrical_engineering_and_electronics_1/block11#typical_geometries|block 11]] we can derive: Given the results from [[https://wiki.mexle.org/electrical_engineering_and_electronics_1/block11#typical_geometries|block 11]] we can derive:
 +<WRAP right>
 +<imgcaption ImgNr3 | current between parallel plates>
 +</imgcaption>
 +{{drawio>CurrentParallelPlates01.svg}}
 +</WRAP>
 +
   * for a current between **parallel plates**    * for a current between **parallel plates** 
     * The current density is given as: \begin{align*} J = {{I}\over{A}} = \sigma \cdot E = {\rm const.} \end{align*}     * The current density is given as: \begin{align*} J = {{I}\over{A}} = \sigma \cdot E = {\rm const.} \end{align*}
-    * The resistance value is given as: \begin{align*}  {{1}\over{R}}&= {{ \rlap{\Large \rlap{\int_A} \int} \, \LARGE \circ} \;\; \vec{J} \, {\rm d} \vec{A}\over{\int \vec{E} \,{\rm d} \vec{s} }} = {{J} \cdot  \rlap{\int_A}\int \;  {\rm d} {A}\over{{E} \cdot \int \,{\rm d} {s} }} \\ &= {{\sigma A}\over{l}} \end{align*} +    * This leads to the electric field: \begin{align*} E = {{J}\over{\sigma}} \end{align*} 
-  * for a current between **coaxial plates** $${{1}\over{R}}=\dfrac{2\pi\sigma l}{\ln(r_a/r_i)}$; hence $R=\rho\,l/A$, $R=\rho\,\ln(r_a/r_i)/(2\pi l)$$ +    * The resistance value is given as: \begin{align*}  {{1}\over{R}}&= {{ \rlap{\Large \rlap{\int_A} \int} \, \LARGE \circ} \;\; \vec{J} \, {\rm d} \vec{A}\over{\int \vec{E} \,{\rm d} \vec{s} }} = {{J} \cdot  \rlap{\int_A}\int \;  {\rm d} {A}\over{{E} \cdot \int \,{\rm d} {s} }} \end{align*}\begin{align*} \boxed{ {{1}\over{R}}= {{\sigma A}\over{l}} }_\text{between parallel plates} \end{align*} 
 +<WRAP right> 
 +<imgcaption ImgNr4 | current between coaxial plates> 
 +</imgcaption> 
 +{{drawio>CurrentCoaxPlates01.svg}} 
 +</WRAP> 
 + 
 +  * for a current between **coaxial plates**  
     * The current density is given as: \begin{align*} J = {{I}\over{2\pi \cdot l \cdot r}} \end{align*}     * The current density is given as: \begin{align*} J = {{I}\over{2\pi \cdot l \cdot r}} \end{align*}
-    * The resistance value is given as: \begin{align*}  {{1}\over{R}}&= {{ \rlap{\Large \rlap{\int_A} \int} \, \LARGE \circ} \;\; \vec{J} \, {\rm d} \vec{A}\over{\int \vec{E} \,{\rm d} \vec{s} }} = {{J} +    * The resistance value is given as: \begin{align*} \boxed{ {{1}\over{R}}=\dfrac{2\pi\sigma l}{\ln(r_a/r_i)} }_\text{between coaxial plates}\end{align*}
  
 ===== Common pitfalls ===== ===== Common pitfalls =====
-  * ...+  * Mixing **$\vec{D}$** (electrostatics) with **$\vec{j}$** (conduction). Use $\vec{D}=\varepsilon\vec{E}$ for capacitors, $\vec{j}=\sigma\vec{E}$ for resistive flow. 
 +  * Forgetting **surface orientation** in $I=\iint_A \vec{j}\cdot{\rm d}\vec{A}$ (normal must align with the chosen current reference arrow). 
 +  * Confusing **material parameters**: $\sigma$ vs. $\rho$ with $\rho=\dfrac{1}{\sigma}$. Writing both in the same formula yields unit errors. 
 +  * Using the **wrong area**: for coax, the relevant area element is the *lateral* surface $2\pi r\,l$ (not $\pi r^2$). 
 +  * Dropping **units** or not checking dimensions; e.g., verify $G=\dfrac{\sigma A}{l}$ gives $\rm S$ and $R$ gives $\Omega$. 
 + 
  
 ===== Exercises ===== ===== Exercises =====
-==== Worked examples ==== 
  
-...+<panel type="info" title="Task 2.2.1 Simulation"> <WRAP group><WRAP column 2%>{{fa>pencil?32}}</WRAP><WRAP column 92%> 
 + 
 +The simulation program of [[http://www.falstad.com/emstatic-old/|Falstad]] can show equipotential surfaces, electric field strength, and current density in different objects. 
 + 
 +  - Open the simulation program via the link 
 +  - Select: ''Setup: Wire w/ Current'' and ''Show Current (j)''. 
 +  - You will now see a finite conductor with charge carriers starting at the top end and arriving at the bottom end. 
 +  - We now want to observe what happens when the conductor is tapered. 
 +      - To do this, select ''Mouse = Clear Square''. You can now use the left mouse button to remove parts from the conducting material. The aim should be, that in the middle of the conductor, there is only a one-box wide line, on a length of at least 10 boxes. If you want to add conductive material again, this is possible with ''Mouse = Add - Conductor''. 
 +      - Consider why more equipotential lines are now accumulating as the conductor is tapered. 
 +      - If you additionally draw in the E-field with ''Show E/j'', you will see that it is stronger along the taper. This can be checked with the slider ''Brightness''. Why is this? 
 +  - Select ''Setup: Current in 2D 1'', ''Show E/rho/j''. Why doesn't the cavity behave like a Faraday cage here? 
 + 
 +</WRAP></WRAP></panel> 
 + 
 +<panel type="info" title="Task 2.2.2 Water Resistor"> <WRAP group><WRAP column 2%>{{fa>pencil?32}}</WRAP><WRAP column 92%> 
 + 
 +In transformer stations sometimes water resistors are used as {{wp>Liquid rheostat}}. In this resistor, the water works as a (poor) conductor which can handle a high power loss.  
 + 
 +The water resistor consists of a water basin. In the given basin two quadratic plates with the edge length of $l = 80 ~{\rm cm}$ are inserted with the distance $d$ between them.  
 +The resistivity of the water is $\rho = 0.25 ~\Omega {\rm m}$. The resistor shall dissipate the energy of $P = 4 ~{\rm kW}$ and shall exhibit a homogeneous current field.  
 + 
 +  - Calculate the required distance of the plates to get a current density of $J = 25 ~{\rm mA/cm^2}$ 
 +  - What are the values of the current $I$ and the voltage $U$ at the resistor, such as the internal electric field strength $E$ in the setup?
  
 +</WRAP></WRAP></panel>
 ===== Embedded resources ===== ===== Embedded resources =====
 <WRAP column half> <WRAP column half>