==== Display of periodic signals on the oscilloscope ====

Build the following circuit in <imgref Fig-6_V2-periodic-signals> with the function generator and the oscilloscope.

{{drawio>lab_electrical_engineering:2_capacitors:Fig-6_V2-periodic-signals.svg}}\\
<imgcaption Fig-6_V2-periodic-signals | Periodic signals on the oscilloscope> </imgcaption>
\\ \\ \\ 
Set the signals listed in <tabref Table-1-Signals_V2> on the function generator and draw the corresponding oscilloscope screen images. The signal display on the oscilloscope should optimally fill the screen

{{drawio>lab_electrical_engineering:2_capacitors:Table-1-Signals_V2.svg}}
<tabcaption Table-1-Signals_V2 | Signals> </tabcaption>
\\ \\ \\ 
Also document the settings of the used channels, the time base, and the GND line on the left side of the screen drawings.

<wrap left>
{{drawio>lab_electrical_engineering:2_capacitors:Fig-7_V2-Sine-1kHz-U-1,8V.svg}}
<imgcaption Fig-7_V2-Sine-1kHz-U-1,8V | Sine, f = 1 kHz, U = 1.8V> </imgcaption>
</wrap>

Channel 1:  $ \frac{V}{\rm DIV} =  $ \\ \\
Time basis: $ \frac{T}{\rm DIV} =  $ \\ 

~~PAGEBREAK~~ ~~CLEARFIX~~
----
<wrap left>
{{drawio>lab_electrical_engineering:2_capacitors:Fig-8_V2-Triangle-4kHz-U-3V.svg}}
<imgcaption FFig-8_V2-Triangle-4kHz-U-3V | Triangle, f = 4 kHz, U = 3 V> </imgcaption>
</wrap>

Channel 1:  $ \frac{V}{\rm DIV} =  $ \\ \\
Time basis: $ \frac{T}{\rm DIV} =  $ \\ 

~~PAGEBREAK~~ ~~CLEARFIX~~
----
\\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\

<wrap left>
{{drawio>lab_electrical_engineering:2_capacitors:Fig-9_V2-Rectangle-unipolar-2kHz-U-5V.svg}}
<imgcaption Fig-9_V2-Rectangle-unipolar-2kHz-U-5V | Rectangle, unipolar, f = 2 kHz, U = 5 V> </imgcaption>
</wrap>
Channel 1:  $ \frac{V}{\rm DIV} =  $ \\ \\
Time basis: $ \frac{T}{\rm DIV} =  $ \\ 

~~PAGEBREAK~~ ~~CLEARFIX~~
----
<wrap left>
{{drawio>lab_electrical_engineering:2_capacitors:Fig-10_V2-Rectangle-bipolar-5kHz-U-2V.svg}}
<imgcaption Fig-10_V2-Rectangle-bipolar-5kHz-U-2V | Rectangle, bipolar, f = 5 kHz, U = 2 V> </imgcaption>
</wrap>

Channel 1:  $ \frac{V}{\rm DIV} =  $ \\ \\
Time basis: $ \frac{T}{\rm DIV} =  $ \\ 

~~PAGEBREAK~~ ~~CLEARFIX~~
----
<wrap left>
{{drawio>lab_electrical_engineering:2_capacitors:Fig-11_V2-Sine-DC-Offset-2,5kHz-U-4V-UDC-2V.svg}}
<imgcaption Fig-11_V2-Sine-DC-Offset-2,5kHz-U-4V-UDC-2V | Sine DC Offset, f = 2.5 kHz, U = 4 V, UDC = 2 V> </imgcaption>
</wrap>

Channel 1:  $ \frac{V}{\rm DIV} =  $ \\ \\
Time basis: $ \frac{T}{\rm DIV} =  $ \\ 

~~PAGEBREAK~~ ~~CLEARFIX~~
----